TENCAN / Equipment series
Automatic electric tablet press
Automatic electric tablet press for XRF, cement, and ceramic sample prep. High precision, replaces manual units. Ideal for lab research.
| Pressurisation method | Electric pressurisation |
| Pressure range | 1-60T/0.1t |
| Hydraulic cylinder stroke | 30~50mm |
These specifications describe the series. Confirm the selected model, power supply and configuration before ordering.
Request a quotation
The fully automatic powder tablet press is a new type of intelligent laboratory tablet press developed based on a combination of manual and electric tablet presses. Equipped with appropriate mold accessories, it can meet the needs of users in pressure molding of powder samples. It is widely used in the analysis and research of new materials such as X-fluorescence, calcium-iron analysis, superconductivity, building materials, powdered ceramics, cement, etc. It is an alternative to existing manual and electric tablet presses and is deeply loved by users.
Technical parameters
| Device model | TYPJ-20S | TYPJ-30S | TYPJ-40S | TYPJ-60S |
|---|---|---|---|---|
| pressure range | 1-20T/0.1t | 1-30T/0.1t | 1-40T/0.1t | 1-60T/0.1t |
| Cylinder stroke | 30mm | 30mm | 50mm | 50mm |
| Pressure method | Electric pressurization | |||
| Pressurization process | Intelligent and fully automatic, programmed pressure/slow pressure-programmed pressure maintenance-programmed pressure replenishment-timed pressure relief | |||
| Display mode | 4.3-inch LCD display | |||
| Holding time | 0-999.59 (minutes.seconds) | |||
| pressure conversion | The program automatically converts and displays the pressure of the mold sample (Mpa) | |||
| Limit protection | The oil cylinder will automatically release pressure when it reaches the limit height to protect the oil cylinder. | |||
| Equipment protection | Steel plate protection, equipped with plexiglass protective door | |||
| overall structure | One-piece structure | |||
| Device power supply | 220V（50Hz/60Hz） | |||
| workspace | 140×160mm | 140×160mm | 175×180mm | 185×220mm |
| Overall dimensions | 230×390×420mm | 230×390×420mm | 280×460×550mm | 300×520×580mm |
| Equipment weight | 90kg | 95kg | 150kg | 180kg |
| Standard configuration | 1 tablet press host, mold selection | |||
Before operation, review the selected model’s instructions and the material requirements.